Clear corner DIY

Steve Lextasy · Posted: Tue Jan 04, 2005 10:55 am Post subject: Clear corner DIY

Alrighty, so here's my guide to clearing your corners on your older model Lexus ES300.
The Results are amazing for a "free" modification.
Before we get started, keep in mind that there is always the chance that your headlight will catch condensation after the clearing.
I'll get to removing condensation later...

Step one -- Remove your headlight bulbs and turn signals from the headlight, then remove the actual headlight from your vehicle

If you can't complete step one -- stop now.

Step Two -- Preparing the Headlight
You will want to remove any screws or clips that you can find on your headlight assembly -- the # of each of these varies on each model year.

Step Three -- Place the Headlight in your oven , set at the lowest setting...for 5 minutes. (I made my roomate do this part -- it was much easier)

Step Four -- Remove the headlight and begin carefully prying it open...It will take about 3 or 4 heating sessions to remove the 2 headlight sections from each other. So, be careful to take your time while prying the headlight open -- patience can save you a few hundred bucks here.

Step Five -- The Headlight is now opened...From here you need to unscrew the mirrored interior headlight section and remove the amber insert.

Your floor should now look like this...(carpet colors may vary)

Step Six -- Now that the amber insert has been removed...Screw the mirrored light piece back in and attach the assembly together. Put the headlight back inside the oven for 3 minutes and smooth the silicone lining. This might take a few sessions to get to your satisfaction. After the light has been cleared and is cooled down, Re-insert any screws and clips that you removed before heating and put it back in your car. Then re-attach the lights/signals. The results of this free mod are incredible -- your car will have a great new look. You can opt to use your stock turn signal bulbs or clear ones, for a more Euro look.

Steve Lextasy · Posted: Tue Jan 04, 2005 10:56 am Post subject:

Credit goes to this dude http://members.aol.com/_ht_a/seanmcelligott/?mtbrand=AOL_US