Removing the yellow from the fog lights housing?

HyeLexus · Lexus Owner Joined: Dec 07, 2004 Posts: 7

How do I remove housings for an IS 300 ? I want to make my fog lights white. I know one of them ways is to use a heat gun but can you please give me more details on how to do it ? And can I do it without a heat gun ?[b]

Steve Lextasy · Posted: Tue Dec 07, 2004 6:58 pm Post subject:

It is very difficult to remove the yellow ring but if you cannot afford to buy the JDM version you can heat it in an oven to 250° and sepparate (the easiest way). Then remove the screws holding the yellow glass ring.

The other way is too purchase the jdm version from japan that already come white.

http://www.lextasy.com/is300_jdm_white_fog_lights_1427_prd1.htm
Click the link above to purchase

HyeLexus · Lexus Owner Joined: Dec 07, 2004 Posts: 7

Do I put the whole fog light in the oven ? How long do I keep it in there ? do I later on just pull it on ? Where Are the Screws located ? CONFUSED

Steve Lextasy · Posted: Tue Dec 07, 2004 7:23 pm Post subject:

Put it in for 10 minutes and check often to see if it will seperate.

Once seperated you will see easily how the yellow glass is removed from the fog lights.

Yes you put the entire fog light in the oven.

HyeLexus · Lexus Owner Joined: Dec 07, 2004 Posts: 7

once seperated how do I put it back on ? This wont melt nothing will it ?

Steve Lextasy · Posted: Tue Dec 07, 2004 7:30 pm Post subject:

to put it back together you must put them back in the oven pushed back together for a couple minutes.

Take it out of the oven and push it back together very hard and wait till it dries/hardens(the glue).

No need to add extra glue.

HyeLexus · Lexus Owner Joined: Dec 07, 2004 Posts: 7

Thanks a lot man you really helped me out. I am gonna try it right now I will let you know about the results. THANKS

HyeLexus · Lexus Owner Joined: Dec 07, 2004 Posts: 7

I put it in the oven for like 15 min now and no results. It is not coming off and it is veryy hott. Is there a specific place I need to get a grib on and pull it off ? I am pulling it from the circular part.

Steve Lextasy · Posted: Tue Dec 07, 2004 8:58 pm Post subject:

If its an Is300 fog light, all you'll need is a flat head screw driver to slightly separate it, then take over with your hands.

toyotafreak · Lexus Owner Joined: Dec 28, 2004 Posts: 1

question, what did you do with the yellow bulb cover? do you think i can take those off your hands?

thanks

Krisp911 · Lexus Owner Joined: Jan 16, 2005 Posts: 1

so did you ever finish the project??

that and ill buy those yellow bulb covers from you for $15 shipped.

ISlover · Lexus Owner Joined: Jan 30, 2005 Posts: 8

i will sell you the WHOLE 2 white fog lights for $200 shipped! they are brand new

stylinaznballa · Lexus Owner Joined: Oct 24, 2004 Posts: 21

Are the fog lights bulbs bright white or is it blueish white ,that are available in lextasy.com ? What do you guys recommend for a bright white HID color for fog lights?

AltezzaDude · Super Moderator Joined: Feb 1, 2004 Posts: 739

The fog lights are clear. The bulbs determine the color of the lighting

stylinaznballa · Lexus Owner Joined: Oct 24, 2004 Posts: 21

so the foglight bulb that are on the lextasy site are a blue colored bulb?

Any suggestions for a bright white foglight bulbs? MTEC? PIAA? Also what are the size for the foglight bulbs? 9006?

stylinaznballa · Lexus Owner Joined: Oct 24, 2004 Posts: 21

Are the foglights that are on the lextasy site, compatible to be connected to a '04 is300? I was surfing yesterday for H.I.D color foglight bulbs and one site said '04 lexus has a H4 type bulb and 01-03 has 9006 type bulbs.
------------------------------------------------------------------------------------
If they have different bulb types, are the bulb connections then compatible?????

nost586 · Lexus Owner Joined: Feb 07, 2007 Posts: 1

is there anyone who wants to trade lens i have the yellow ones already out im looking for the white ones

lexusleeper · Lexus Owner Joined: Apr 08, 2007 Posts: 1

I JUST did this trick... WORKED AWESOME! I just threw a coat of black over the chrome housing (match the body)... but my dilemma is - how do you get the damn yellow off the lens? I have the lens in my hand, and can't for the life of me figure it out... if i do, i'll re-post, but any ideas? i know it isn't solid yellow, since i can see through it clear at some angles... so there has got to be a trick. please help!