How to diassemble your lights

boosted_IS · Posted: Sun Feb 22, 2004 7:44 am Post subject: How to diassemble your lights

For people who want to do the paint or install angel eye's here are some quick instructions. Or mail them to me and I can do it for you.
This project takes 2 people
Things neede:flat screw driver,gloves,3M adheasive remover,paint,silicone

1)remove the lights from the car.
2)preheat oven to 250
3)remove all bulbs and ballast.
4)remove leveling motor and plastic gears.
5)place in oven for 20 mintues
6)with a small screw driver pry the tabs apart while some else with gloves pulls the plastic apart.
7)use what ever paint you want and paint the removable chrome plastic part.
8)install angel eye's per packing instructions
9)reassemble the newly painted parts.
10)place the back part of the light back in to the oven for 10-15 minutes
11)remove it from the oven
12)push the pieces back together. As HARD as you can keep them together while the glue cools.
13)use silicone to do double seal the lamp.
14) put everything back to gether.

Your done

pics of how to do it click link
http://www.lextasy.com/forum/viewtopic.php?p=5369&highlight=light#5369

isBMR300 · Posted: Tue Feb 24, 2004 9:16 am Post subject:

thanks for the instructions...if we were to send them to you how much would you charge to paint the headlights??

Flatline IS · Posted: Tue Feb 24, 2004 11:41 am Post subject:

Short and to the point. Now if it was only that easy...

Good instructions though.